The shown prices might not correspond to your region. Login or select your region here.
 
 

A-SERIES 25

a-series-25

Technical data
Controller for motorsbrushless
Number of Li-Ion, Li-Pol feeding cells2 - 4
Number of NiCd, NiMh feeding cells6 - 12
Number of A123 feeding cells2 - 4
Compatible with any feeding cellsyes
Operating voltage6 - 17.0 V
Max. continuous current (for full throttle)25 A
Max. peak current (peak 5 sec.)30 A
Version BEC / Switching BEC / OPTOBEC
BEC voltage5 V
Max. BEC current at 25 °C4 A
BEC short circuit protectionyes
Number of regulation steps1024
PWM frequency8 kHz
On-state switch (FETs) resistance at 25 °C2 × 3.1 mohm
Dimensions28×25×6 mm1.10×0.98×0.24 in
Dimensions with external capacitor36×25×6 mm1.42×0.98×0.24 in
Weight without power conductors10 g0.322 oz
Weight incl. all conductors19 g0.611 oz
Power conductors cross-section to batt. / to mot.1.5/1.5 mm20.0023 in2
Length of the power conductors90 mm3.543 in
Servocable cross-section0.25 mm20.0004 in2
Length of the servocable190 mm7.480 in
Design possibilities:
Possibility of design with external heatsinksno
Possibility of design with external heatsinks + FANno
Possibility of "hydro" versionno
Possibility of design with switch (connected safely)yes
Programming and PC Cooperation Features:
Software updates available through internetno
Programming using PCno
Universal programming cardyes
Programming using throttle stickyes
Reading-out of data from the controller using PCno
Cooperates with Black Box (data logger)no
ICS connector - communication with PC without manipulation with servocableno
Features:
Plug and Play (functional immediately without the need for additional programming)yes
Higher resistance against overloadingno
Outstanding cells managementyes
Extremely powerful Switched BECno
Extremely powerful MEGA BECyes
Possibility of setting the voltage of BECno
Possibility of setting an amount of residual energy for BECyes
Possibility of setting switching off voltageyes
Possibility of automatic setting of cut off voltageyes
Possibility of manually set number of cellsyes
Manually set type of cellsyes
Automatically set timingyes
Possibility of manually set timingyes
Possibility of automatic setting of throttle limitsyes
Brake ON / OFFyes
Brake strengthyes
MGM Race Modeno
Accelerationno
Decelerationno
When batt. low (almost empty) - motor power reductionyes
When batt. low (almost empty) - instant motor cut-offno
Software reversal of rotationyes
Masking of interferenceyes
False-start protectionyes
Current fuse of the controlleryes
Temperature fuse of the controlleryes
ACR - Automatic Current Reduceyes
ACL - Automatic Current Limitingno

Accessories

UNICARD+
Is designed for easy and comfortable programming of all accessible parameters of various types of MGM Compro controllers

Manual
Compare

E-shop

Buy It Now
EUR 58.56