The shown prices might not correspond to your region. Login or select your region here.
 
 

Products

User

Zoom Page

Accessories

Poll

What were the most relevant criteria for your purchase of MGM compro products?


superior quality and technical arrangement - 28%
unique characteristics of the products - 11%
previous positive experience - 11%
information on the website - 12%
friends' recommendation - 12%
magazines advertising - 11%
negative experience with other producers - 15%

Votes: 1090


Previous Polls

TMM 25035-3 E-SERIES

airplanes-e-series-types
Ilustrative picture. Design with External Heatsinks

Technical data
Controller for motorsbrushless
Number of Li-Ion, Li-Pol feeding cells3 - 8
Number of NiCd, NiMh feeding cells9 - 24
Number of A123 feeding cells4 - 9
Compatible with any feeding cellsyes
Operating voltage9 - 35.0 V
Max. continuous current (for full throttle)250 A
Max. peak current (peak 5 sec.)300 A
Version BEC / Switching BEC / OPTOOPTO
BEC voltage- V
Max. BEC current at 25 °C- A
BEC short circuit protectionno
Number of regulation steps1024
PWM frequency8/16/32 kHz
On-state switch (FETs) resistance at 25 °C2 × 0.28 mohm
Dimensions50×31×22 mm1.97×1.22×0.87 in
Dimensions with external capacitor80×31×22 mm3.15×1.22×0.87 in
Weight without power conductors81 g2.604 oz
Weight incl. all conductors119 g3.826 oz
Power conductors cross-section to batt. / to mot.6/4 mm20.0093 in2
Length of the power conductors110 mm4.331 in
Servocable cross-section0.25 mm20.0004 in2
Length of the servocable190 mm7.480 in
Design possibilities:
Possibility of design with external heatsinksyes
Possibility of design with external heatsinks + FANyes
Possibility of "hydro" versionyes
Possibility of design with switch (connected safely)yes
Programming and PC Cooperation Features:
Software updates available through internetyes
Programming using PCyes
Universal programming cardyes
Programming using throttle stickyes
Reading-out of data from the controller using PCyes
Cooperates with Black Box (data logger)no
ICS connector - communication with PC without manipulation with servocableyes
Features:
Plug and Play (functional immediately without the need for additional programming)yes
Higher resistance against overloadingyes
Outstanding cells managementyes
Extremely powerful Switched BECno
Extremely powerful MEGA BECno
Possibility of setting the voltage of BECno
Possibility of setting an amount of residual energy for BECno
Possibility of setting switching off voltageyes
Possibility of automatic setting of cut off voltageyes
Possibility of manually set number of cellsyes
Manually set type of cellsyes
Automatically set timingyes
Possibility of manually set timingyes
Possibility of automatic setting of throttle limitsyes
Brake ON / OFFyes
Brake strengthyes
MGM Race Mode2
Accelerationyes
Decelerationno
When batt. low (almost empty) - motor power reductionyes
When batt. low (almost empty) - instant motor cut-offyes
Software reversal of rotationyes
Masking of interferenceyes
False-start protectionyes
Current fuse of the controlleryes
Temperature fuse of the controlleryes
ACR - Automatic Current Reduceyes
ACL - Automatic Current Limiting yes

Accessories

USBCOM++
These modules are designed for communication of controllers MGM compro and some other devices (such as chargers, balancers etc.), with PC
UNICARD+
Is designed for easy and comfortable programming of all accessible parameters of various types of MGM Compro controllers
CC_03
In connection with USBCOM++ provides SW updates through internet in MGM compro controllers and also provides to connect chargers AQCB - xxx with USBCOM++ and also CM_3 module with USBCOM++
CC_02
Provides to connect speed controllers with USBCOM++ and also speed controllers with UNICARD+

Manual
Compare
Software

E-shop

Buy It Now
EUR 350.58